Alison Crafts

View Original

Rose Gold Foil Tumbler Tutorial

Adding Foils to your tumblers is such a fun way to add both a fun texture but also design to your tumblers. In this tutorial, I just added my foils and glitter right onto a black painted base but you can also add them on top of your glitter to make even more fun textured designs.

See this content in the original post

Recommended Supplies

Stainless Steel Tumblers (discount code: alisoncrafts)

Glitter Glue

Grande Finale

Universal White

Flip’n Awesome Paints

Sand Paper

Glitzy Kreations Glitter (Discount Code: alison10)

Glitter Dipped Sips Glitter (Discount Code: alisoncrafts10)

Foils


STEPS

STEP 1: PREP YOUR SURFACE

Prep is important for any project. Sand with 220 Grit Sand paper to prep your tumbler. Watch here for a demonstration.

STEP 2: ADD BASE COAT

I used spray paint for this tumbler, but you could use Universal Black if you prefer. I like the flat black from Rustoleum and make sure you let it dry for 48 hours. I also did a few coats of Brite Tone (or Grande Finale) before I added my foils.

STEP 3: ADD FOILS

Cut foils into strips so you can place them easily.

Brush on glitter glue and let it dry just until clear. Apply foils around the cup and burnish with felt edge squeegee tool (or with a cloth and your finger)

Apply a bit of heat from a heat gun, and burnish one more time.

Peel up transfer sheets.

STEP 4: APPLY GLITTER

Use a foam brush to do long brush strokes of your glitter glue, then add the Goldella gold glitter from Glitzy Kreations.

Let dry 2 hours.

STEP 5: LAYER BRITE TONE or GRANDE FINALE

Now you’re ready for your BT layers! Apply 4-5 coats of Brite Tone letting each coat dry for 4 hours. (Or you can use Grande Finale)

STEP 6: FIRST SAND

After you do 5 coats of BT, let it dry over night. Then do a light sand with 400 grit sand paper.

Continue adding coats of BT (sanding every 3 coats) until you have a smooth surface.

STEP 7: LAYER BRITE TONE or GRANDE FINALE

Apply 3-4 coats of Brite Tone letting each coat dry for 4 hours.

After you do 3-4 coats of BT, let it dry over night. Then do a light sand with 400 grit sand paper ONLY OVER THE GLITTER then follow up with a few more coats of BT until you are happy with how it looks!

STEP 8: CLEAN THE RIM

Once you’re satisfied with your finish, clean the rim! Let the cup dry for 5 days before giving it to it’s new home!

Watch Full Tutorial on YouTube:

Let’s Connect on Instagram

See this Instagram gallery in the original post

Secondary Blog Cover Photo